Experimental Station 2-1

Beam line 2-1 is a dedicated thin film/powder diffraction and reflectivity station. It is equipped with a Huber 2-circle goniometer and a high-resolution crystal-analyzer detector. There are several different types of sample stages to cater to a broad user-base including a motorized xyz stage, a capillary spinner, a "wet" liquid sample stage, and an Anton-Paar furnace (25-900 ºC). Data acquisition is performed using SPEC, with SPECPlot GUI interface (in-house diffractometer control, peak fitting and plotting software). 

Supported Techniques
Powder diffraction
Thin film diffraction
Main Scientific Disciplines
Environmental Sciences
Materials Sciences
Beam Line Specifications


1.3 Tesla Bend Magnet, 1.5 mrad angular acceptance, side station

  Energy Range Resolution ΔE/E Spot Size Flux Angular Acceptance
Focused 5500 - 17500 eV ~5 x 10-4 0.20 x 0.45 mm2 - 1.5 mrad



Bent, cylindrical single crystal Si, Rh-coated

Monochromator: Si(111) (standard configuration)


584 μm Be, 10.7 m He, 15.2 μm C


Detectors: ionization chambers, Bicron® PMT, Vortex™ Si drift detector (1 channel), Pilatus100K

Other: Shutters and variable filters to alleviate beam damage. Soller slits, Si crystal analyzer  

Sample Environment

Capillary spinner

Temperature control (Anton-Paar furnace): 300-1150 K

Inert gas manifold (He) for air-sensitive samples 

Data Acquisition and Analysis

SPEC, SPECplot GUI, XMAPgui (for Vortex detector)

Beam Line Phone
650-926-5221. On-site Users: Contact the Duty Operator at 9-926-4040
Beam Line Contact

Find Stanford Synchrotron Radiation Lightsource on FlickrFind Stanford Synchrotron Radiation Lightsource on YouTubeFind Stanford Synchrotron Radiation Lightsource on Twitter